Cisco 6823, Руководство администратора

Страница: 81 / 194

The base stations synchronize their data regularly in a dualcell system. All the registered handsets can
communicate with any base station in the dualcell system. If the primary base station becomes unresponsive,
the other base station in the dualcell system automatically becomes the primary base station.
For 110 Single-Cell Base Station, the handsets register only with the primary base station. Note
For information about the workflow to set up a dualcell or multicell system for 210 Multi-Cell Base Station,
see
Add Additional Base Stations to Make a Multicell Network (Workflow), on page 76
Use this workflow to set up a dualcell system for 110 Single-Cell Base Station:
Before you begin
Set up the first base station and add at least one handset. For more information see, Set Up the Cisco IP DECT
6800 Series (Workflow), on page 13 .
Procedure
Purpose Command or Action
Set up the first base station as the primary base
station for a dualcell system. Set Up a Dualcell System on the Primary Base
Station, on page 73 Step 1
Set up a secondary base station. Set Up a Dualcell System on the Secondary
Base Station, on page 74
Step 2
Perform a backup to save the configuration. (Optional) Back Up the System Configuration,
on page 150
Step 3
Set Up a Dualcell System on the Primary Base Station
For the base stations to work together, the System chain ID of both the base stations must be the same. Use
this procedure to set up the existing base station for dualcell. You will do this procedure only once.
You can't change the System chain ID of 110 Single-Cell Base Station. Note
Before you begin
• The time server must be configured on the base station.
• At least one extension must be added to the base station.
Procedure
Step 1
Access the existing base station web page. See Sign in to the Administration Web Page, on page 42 .
Step 2 Click
Dual cell
.
Cisco IP DECT 6800 Series Administration Guide
73
Phone Administration
Set Up a Dualcell System on the Primary Base Station