manualshive.com logo in svg

Cisco 5505 - ASA Firewall Edition Bundle, Руководство по настройке CLI

"Устройство Cisco 5505 - комплект версии межсетевого экрана ASA, включает в себя руководство по установке оборудования. Вы можете бесплатно загрузить "Hardware Installation Manual" этого продукта с нашего веб-сайта. Получите подробную информацию о настройках и использовании устройства."

Поделиться
Скачать
background image

 

1-9

Cisco ASA Series CLI Configuration Guide

 

Chapter 1      Routing Overview

  Information About the Routing Table

Dynamic Routing and Failover

Because static routing systems cannot react to network changes, they generally are considered unsuitable 
for large, constantly changing networks. Most of the dominant routing algorithms are dynamic routing 
algorithms, which adjust to changing network circumstances by analyzing incoming routing update 
messages. If the message indicates that a network change has occurred, the routing software recalculates 
routes and sends out new routing update messages. These messages permeate the network, stimulating 
routers to rerun their algorithms and change their routing tables accordingly. 

Dynamic routing algorithms can be supplemented with static routes where appropriate. A router of last 
resort (a router to which all unroutable packets are sent), for example, can be designated to act as a 
repository for all unroutable packets, ensuring that all messages are at least handled in some way. 

Dynamic routes are synchronized on the standby unit when the routing table changes on the active unit, 
which means that all additions, deletions, or changes on the active unit are immediately propagated to 
the standby unit. If the standby unit becomes active after the primary unit has been active for a period of 
time, routes become synchronized as a part of the failover bulk synchronization process, so the routing 
table on the active/standby failover pair should appear the same. 

For more information about static routes and how to configure them, see the 

“Configuring Static and 

Default Routes” section on page 1-2

.

Dynamic Routing and Clustering

Dynamic routing is fully integrated in a cluster, and routes are shared across units (up to eight units are 
allowed in a cluster). Routing table entries are also replicated across units in a cluster.

When one unit transitions from the slave to the master, the epoch number (32-bit sequence number) for 
the RIB table is incremented. After the transition, the new master unit initially has RIB table entries that 
are the mirror image of the previous master unit. In addition, the reconvergence timer starts on the new 
master unit. When the epoch number for the RIB table is incremented, all existing entries are considered 
stale. Forwarding of IP packets continues as normal. On the new master unit, dynamic routing protocols 
start to either update existing route entries or create new route entries with the new epoch number. These 
modified or new entries with the current epoch number indicate that they have been refreshed and are 
synchronized to all slave units. After the reconvergence timer has expired, old entries from the RIB table 
are removed. RIB table entries for OSPF routes, RIP routes, and EIGRP routes are synchronized to the 
slave units.

Bulk synchronization occurs only when a unit joins a cluster and is from the master unit to a joining unit.

For dynamic routing updates, when the master unit learns a new route through OSPF, RIP or EIGRP, the 
master unit sends those updates to all slave units through reliable message transmission. Slave units 
update their RIB tables after they receive a cluster route update message.

For the supported dynamic routing protocols (OSPF, RIP, and EIGRP), routing packets from layer 2 load 
balancing interfaces on the slave units are forwarded to the master unit. Only the master unit sees and 
processes dynamic routing protocol packets. When the slave unit requests a bulk synchronization, all 
routing entries learned through layer 2 load balancing interfaces are replicated. 

When new routing entries are learned through layer 2 load balancing interfaces on the master unit, the 
new entries are broadcast to all slave units. When existing routing entries are modified because of a 
network topology change, the modified entries are also synchronized to all slave units. When existing 
routing entries are removed because of a network topology change, the removed entries are also 
synchronized to all slave units.

Содержание 5505 - ASA Firewall Edition Bundle





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 5505 - ASA Firewall Edition Bundle

National Instruments NI PXI-1044 User Manual preview
NI PXI-1044
Бренд: National Instruments Страницы: 63
Samsung KCT52A Training Manual preview
KCT52A
Бренд: Samsung Страницы: 93
Supermicro Supero SC745 Series User Manual preview
Supero SC745 Series
Бренд: Supermicro Страницы: 26
Supermicro SC811i-280 User Manual preview
SC811i-280
Бренд: Supermicro Страницы: 54
Supermicro SC510 Series User Manual preview
SC510 Series
Бренд: Supermicro Страницы: 62
Omnitron Systems Technology 8249-0 iConverter User Manual preview
8249-0 iConverter
Бренд: Omnitron Systems Technology Страницы: 12
Cisco ASR 5500 System Administration Manual preview
ASR 5500
Бренд: Cisco Страницы: 430
Cisco cBR Maintaining Manual preview
cBR
Бренд: Cisco Страницы: 12
Cisco CRS Installation Manual preview
CRS
Бренд: Cisco Страницы: 148
Cisco cBR Hardware Installation Manual preview
cBR
Бренд: Cisco Страницы: 64
Cisco cBR Series Configuration Manual preview
cBR Series
Бренд: Cisco Страницы: 58
Cisco ASR 5500 Installation Manual preview
ASR 5500
Бренд: Cisco Страницы: 192
Cisco C4200 Maintaining Manual preview
C4200
Бренд: Cisco Страницы: 26
Cisco cBR Series Hardware Installation Manual preview
cBR Series
Бренд: Cisco Страницы: 270
Supermicro SC113TQ-700CB User Manual preview
SC113TQ-700CB
Бренд: Supermicro Страницы: 80
iStarUSA S-355-JB Installation Manual preview
S-355-JB
Бренд: iStarUSA Страницы: 1
National Instruments cDAQ-9171 Quick Start preview
cDAQ-9171
Бренд: National Instruments Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды