Cisco 5505 - ASA Firewall Edition Bundle, Руководство по настройке CLI

Страница: 1317 / 2164

1-13
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Cisco Intercompany Media Engine Proxy
Configuring Cisco Intercompany Media Engine Proxy
Command Purpose
Step 1
hostname(config)# object network name
Examples:
hostname(config)# object network
ucm_real_192.168.10.30
hostname(config)# object network
ucm_real_192.168.10.31
Configures a network object for the real address of
Cisco UCM that you want to translate.
Step 2
hostname(config-network-object)# host ip_address
Examples:
hostname(config-network-object)# host 192.168.10.30
hostname(config-network-object)# host 192.168.10.31
Specifies the real IP address of the Cisco UCM host
for the network object.
Step 3
(Optional)
hostname(config-network-object)# description string
Example:
hostname(config-network-object)# description “Cisco
UCM Real Address”
Provides a description of the network object.
Step 4
hostname(config-network-object)# exit Exits from the objects configuration mode.
Step 5
hostname(config)# object network name
Example:
hostname(config)# object network
ucm_map_209.165.200.228
Configures a network object for the mapped address
of the Cisco UCM.
Step 6
hostname(config-network-object)# host ip_address
Example:
hostname(config-network-object)# host
209.165.200.228
Specifies the mapped IP address of the Cisco UCM
host for the network object.
Step 7
(Optional)
hostname(config-network-object)# description string
Example:
hostname(config-network-object)# description “Cisco
UCM Mapped Address”
Provides a description of the network object.
Step 8
hostname(config-network-object)# exit
Exits from the objects configuration mode.
Step 9
hostname(config)# nat (inside,outside) source static
real_obj mapped_obj
Examples:
hostname(config)# nat (inside,outside) source static
ucm_real_192.168.10.30 ucm_209.165.200.228
hostname(config)# nat (inside,outside) source static
ucm_real_192.168.10.31 ucm_209.165.200.228
Specifies the address translation on the network
objects created in this procedure.
Where real_obj is the name that you created in
Step 1 in this task.
Where mapped_obj is the name that you created in
Step 5 in this task.
Command Purpose
Step 1
hostname(config)# object network name
Examples:
hostname(config)# object network
ucm-pat-209.165.200.228
Configures a network object for the outside IP
address of Cisco UCM that you want to translate.
Step 2
hostname(config-network-object)# host ip_address
Example:
hostname(config-network-object)# host
209.165.200.228
Specifies the real IP address of the Cisco UCM host
for the network object.
Step 3
hostname(config-network-object)# exit
Exits from the objects configuration mode.