15
Cisco 40-Gigabit and 100-Gigabit CFP Transceiver Modules Installation Note
OL-23946-01
Installing the CFP Transceiver
Step 8
When you are ready to attach the network cable interface, remove the dust plugs and inspect and clean
fiber connector end faces, and then immediately attach the network interface cable connectors into the
CFP transceiver optical bores. (See
Figure 7
and
Figure 8
.)
Note
If you are installing a FourX adapter (CVR-CFP-4SFP10G=) (shown in
Figure 3
), you must
install 10GBASE-X SFP+ transceivers in the adapter ports. Follow the SFP+ transceiver
installation procedure documented at:
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/installation/note/7
8_15160.html
For complete information on inspecting and cleaning fiber-optic connections, see the white-paper
document at this URL:
http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml
Figure 7
Cabling an Optical CFP Transceiver Module with SC Connectors
1
LINK
LINK
AC
TI
VE
2
281588
Network interface
cable
SC connector