Cisco 3750 - Catalyst EMI Switch, Справочник по командам

Страница: 416 / 1154

2-386
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
mls qos srr-queue output dscp-map
mls qos srr-queue output dscp-map
Use the mls qos srr-queue output dscp-map global configuration command to map Differentiated
Services Code Point (DSCP) values to an egress or to map DSCP values to a queue and to a threshold
ID. Use the
no form of this command to return to the default setting.
mls qos srr-queue output dscp-map queue queue-id { dscp1...dscp8 | threshold threshold-id
dscp1...dscp8 }
no mls qos srr-queue output dscp-map
Syntax Description
Defaults
Table 2-15 shows the default DSCP output queue threshold map:
Command Modes
Global configuration
Command History
queue queue-id Specify a queue number.
For queue-id , the range is 1 to 4.
dscp1...dscp8 Map DSCP values to an egress queue.
For dscp1...dscp8 , enter up to eight values, and separate each value with a
space. The range is 0 to 63.
threshold threshold-id
dscp1...dscp8
Map DSCP values to a queue threshold ID.
For threshold-id , the range is 1 to 3.
For dscp1...dscp8 , enter up to eight values, and separate each value with a
space. The range is 0 to 63.
Table 2-15 Default DSCP Output Queue Threshold Map
DSCP Value Queue ID – Threshold ID
0–15 2–1
16–31 3–1
32–39 4–1
40–47 1–1
48–63 4–1
Release Modification
12.1(11)AX This command was introduced.