Cisco 3750 - Catalyst EMI Switch, Справочник по командам

Страница: 343 / 1154

2-313
Catalyst 3750 Switch Command Reference
OL-8552-07
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
link state track
link state track
Use the link state track user EXEC command to enable a link-state group. Use the no form of this
command to disable a link-state group.
link state track [ number ]
no link state track [ number ]
Syntax Description
Defaults Link-state tracking is disabled for all groups.
Command Modes Global configuration
Command History
Usage Guidelines Use the link state track global configuration command to enable a link-state group.
Examples This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
number (Optional) Specify the link-state group number. The group number can
be 1 to 10. The default is 1.
Release Modification
12.2(25)SEE This command was introduced.
Command Description
link state track Configures an interface as a member of a link-state group.
show link state group Displays the link-state group information.
show running-config Displays the current operating configuration. For syntax information,
select
Cisco IOS Configuration Fundamentals Command Reference
for Release 12.2 > Cisco IOS File Management Commands >
Configuration File Commands
.