C H A P T E R
4-1
NEBS Level 3 and ETSI Compliance Kit Installation Guide for Cisco 3620, Cisco 3640, and Cisco 3660 Routers
78-5450-06 B0
4
Installation on Cisco 3660 Routers
This chapter describes how to install a NEBS Level 3/ETSI kit on your Cisco 3660 router and contains
the following sections:
•
Attaching the 23-Inch Rack-Mounting Brackets, page 4-1
•
Installing the Ground Lug, page 4-4
•
Making Network Connections, page 4-6
•
Installing the Alarm Terminal Block, page 4-7
Note
If you have yet to install your Cisco 3600 series router, see the publication
Cisco 3600 Series
Hardware Installation Guide
.
You can access this document
online and on the documentation CD-ROM that you received with
your router
at:
Cisco Product Documentation > Access Servers and Access Routers > Modular
Access Routers > Cisco 3600 Series Routers > Hardware installation documents for Cisco 3600
series
Attaching the 23-Inch Rack-Mounting Brackets
The NEBS kit for Cisco 3660 routers comes with rack-mount brackets for installing the Cisco 3600
series routers in 23-inch or 24-inch racks.
Attach the mounting brackets to the chassis as shown in
Figure 4-1
,
Figure 4-2
, or
Figure 4-3
, using the
screws provided. Attach the second bracket to the opposite side of the chassis.
