2-350
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show auto qos
show auto qos
Use the
show auto qos
user EXEC command
to display the quality of service (QoS) commands entered
on the interfaces on which automatic QoS (auto-QoS) is enabled.
show auto qos
[
interface
[
interface-id
]]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
In releases earlier than Cisco IOS Release 12.2(20)SE, the
show auto qos
[
interface
[
interface-id
]]
command output shows the initial generated auto-QoS configuration.
In Cisco IOS Release 12.2(20)SE or later, the
show auto qos
command output shows only the auto-QoS
command entered on each interface. The
show auto qos interface
interface-id
command output shows
the auto-QoS command entered on a specific interface.
Use the
show running-config
privileged EXEC command to display the auto-QoS configuration and the
user modifications.
To display information about the QoS configuration that might be affected by auto-QoS, use one of these
commands:
•
show mls qos
•
show mls qos maps cos-dscp
•
show mls qos interface
[
interface-id
] [
buffers
|
queueing
]
•
show mls qos maps
[
cos-dscp
|
cos-input-q
|
cos-output-q
|
dscp-cos
|
dscp-input-q
|
dscp-output-q
]
•
show mls qos input-queue
•
show running-config
interface
[
interface-id
]
(Optional) Display auto-QoS information for the specified port or
for all ports. Valid interfaces include physical ports.
Release
Modification
12.1(19)EA1
This command was introduced.
12.2(20)SE
The information in the command output changed, and the user guidelines
were updated.