manualshive.com logo in svg

Cisco 300 Series, Руководство CLI

Поделиться
Скачать
Cisco 300 Series Скачать руководство пользователя страница 63

802.1X Commands

63

OL-32830-01 Command Line Interface Reference Guide

2

If a RADIUS server assigns a client with a non-existing VLAN, the switch creates 
the VLAN. The VLAN is removed when it is no longer being used.

If RADIUS provides valid VLAN information and the port does not belong to the 
VLAN received from RADIUS, it is added to the VLAN as an egress untagged port. 
When the last authorized client assigned to the VLAN becomes unauthorized or 
802.1x is disabled on the port, the port is excluded from the VLAN.

If the authentication mode is single-host or multi-host, the value of PVID is set to 
the VLAN_ID.

If an authorized port in the single-host or multi-host mode changes its status to 
unauthorized, the port static configuration is reset.

If the authentication mode is multi-sessions mode, the PVID is not changed and all 
untagged traffic and tagged traffic not belonging to the unauthenticated VLANs 
are mapped to the VLAN using TCAM.

If the last authorized host assigned to a VLAN received from RADIUS connected to 
a port in the multi-sessions mode changes its status to unauthorized, the port is 
removed from the VLAN if it is not in the static configuration.

See the User Guidelines of the dot1x host-mode command for more information.

If 802.1X is disabled the port static configuration is reset.

If the reject keyword is configured and the RADIUS server authorizes the host but 
the RADIUS accept message does not assign a VLAN to the supplicant, 
authentication is rejected.

If the static keyword is configured and the RADIUS server authorizes the host then 
even though the RADIUS accept message does not assign a VLAN to the 
supplicant, authentication is accepted and the traffic from the host is bridged in 
accordance with port static configuration.

If this command is used when there are authorized ports/hosts, it takes effect at 
subsequent authentications. To manually re-authenticate, use the dot1x 
re-authenticate command.

The command cannot be configured on a port if it together with

•

WEB-Based authentication

•

Multicast TV-VLAN

•

Q-in-Q

•

Voice VLAN

Содержание 300 Series






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды