B-29
Catalyst 2975 Switch Software Configuration Guide
OL-19720-02
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Software Images
To upgrade a switch with an incompatible software image, use the
archive copy-sw
privileged EXEC
command to copy the software image from an existing stack member to the incompatible switch. That
switch automatically reloads and joins the stack as a fully functioning member.
These sections contain this configuration information:
•
Preparing to Download or Upload an Image File By Using FTP, page B-29
•
Downloading an Image File By Using FTP, page B-30
•
Uploading an Image File By Using FTP, page B-32
Preparing to Download or Upload an Image File By Using FTP
You can copy images files to or from an FTP server.
The FTP protocol requires a client to send a remote username and password on each FTP request to a
server. When you copy an image file from the switch to a server by using FTP, the Cisco IOS software
sends the first valid username in this list:
•
The username specified in the
archive download-sw
or
archive upload-sw
privileged EXEC
command if a username is specified.
•
The username set by the
ip
ftp username
username
global configuration command if the command
is configured.
•
Anonymous.
The switch sends the first valid password in this list:
•
The password specified in the
archive download-sw
or
archive upload-sw
privileged EXEC
command if a password is specified.
•
The password set by the
ip ftp password
password
global configuration command if the command
is configured.
•
The switch forms a password named
. The variable
username
is the
username associated with the current session,
switchname
is the configured hostname, and
domain
is the domain of the switch.
The username and password must be associated with an account on the FTP server. If you are writing to
the server, the FTP server must be properly configured to accept the FTP write request from you.
Use the
ip ftp username
and
ip ftp password
commands to specify a username and password for all
copies. Include the username in the
archive download-sw
or
archive upload-sw
privileged EXEC
command if you want to specify a username only for that operation.
If the server has a directory structure, the image file is written to or copied from the directory associated
with the username on the server. For example, if the image file resides in the home directory of a user
on the server, specify that user's name as the remote username.
Before you begin downloading or uploading an image file by using FTP, do these tasks:
•
Ensure that the switch has a route to the FTP server. The switch and the FTP server must be in the
same subnetwork if you do not have a router to route traffic between subnets. Check connectivity to
the FTP server by using the
ping
command.
•
If you are accessing the switch through the console or a Telnet session and you do not have a valid
username, make sure that the current FTP username is the one that you want to use for the FTP
download. You can enter the
show users
privileged EXEC command to view the valid username. If
you do not want to use this username, create a new FTP username by using the
ip ftp username
username
global configuration command. This new name will be used during all archive operations.
Содержание 2975 - Catalyst LAN Base Switch
