background image

26

Definitions of Service Request Severity

To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.

Severity 1 (S1)—Your network is “down,” or there is a critical impact to your business operations. You and Cisco will commit 
all necessary resources around the clock to resolve the situation. 

Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are 
negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal 
business hours to resolve the situation.

Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You 
and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is 
little or no effect on your business operations.

12  

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Visit Cisco Marketplace, the 
company store, at this URL:

http://www.cisco.com/go/marketplace/

The Cisco 

Product Catalog

 describes the networking products offered by Cisco Systems, as well as ordering and customer 

support services. Access the Cisco Product Catalog at this URL:

http://cisco.com/univercd/cc/td/doc/pcat/

Cisco Press

 publishes a wide range of general networking, training and certification titles. Both new and experienced users 

will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:

http://www.ciscopress.com

Packet

 magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each 

quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, 
as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and 
training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/packet

iQ Magazine

 is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use 

technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges 
facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help 
readers make sound technology investment decisions. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

Internet Protocol Journal

 is a quarterly journal published by Cisco Systems for engineering professionals involved in 

designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal 
at this URL:

http://www.cisco.com/ipj

World-class networking training is available from Cisco. You can view current offerings at this URL:

http://www.cisco.com/en/US/learning/index.html

Содержание 2691 Series





























Отзывы: