4-12 Cisco 2524 and Cisco 2525 Router User Guide
Configuring the Router
Step 2
Enter yes if you will be using AppleTalk on the interface. Enter yes to configure
the router for extended AppleTalk networks, and then enter the cable range. Enter
the zone name, and any other additional zones that will be associated with your
local zone:
Configure AppleTalk on this interface? [no]: yes
Extended AppleTalk network? [no]: yes
AppleTalk starting cable range [0]: 3
AppleTalk ending cable range [1]: 3
AppleTalk zone name [myzone]:
AppleTalk additional zone name: otherzone
AppleTalk additional zone name:
Step 3
Determine if you are going to enable IPX on the interface. If so, enter yes and then
enter the unique IPX network number:
Configure IPX on this interface? [no]: yes
IPX network number [1]: B001
Configuring the Synchronous Serial Interfaces
The synchronous serial interfaces are configured to allow connection to WANs. Once the
Ethernet or Token Ting port on your router has been configured, take the following steps to
configure the synchronous serial interfaces:
Step 1
Press Return or enter yes to configure serial port 0:
Configuring interface Serial0:
Is this interface in use? [yes]:
Step 2
Determine which protocols you want on the synchronous serial interface and enter
the appropriate responses. In this example, the system is being configured for IP,
AppleTalk, and IPX:
Configure IP on this interface? [yes]:
Configure IP unnumbered on this interface? [no]:
IP address for this interface: 172.16.73.1
Number of bits in subnet field [8]:
Class B network is 172.16.0.0, 8 subnet bits; mask is
255.255.255.0
Configure AppleTalk on this interface? [no]: yes
Extended AppleTalk network? [yes]:
AppleTalk starting cable range [2]: 4
