Cisco 2431 - IAD Router, Руководство по установке оборудования

Страница: 75 / 88

D-1
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
OL-7678-01
A P P E N D I X
D
Configuring the Switch with the CLI-Based
Setup Program
This appendix provides a command-line interface (CLI)-based setup procedure for a standalone switch.
For product overview information, see
Chapter 1, “Product Overview.” Before connecting the switch to
a power source, review the safety warnings in Chapter 2, “Switch Installation.” For installation
procedures on rack-mounting your switch, connecting to the switch ports, or connecting to the small
form-factor pluggable (SFP) modules, see
Chapter 2, “Switch Installation.”
These steps describe how to do a simple installation:
1.
Accessing the CLI Through the Console Port, page D-1
2.
Taking Out What You Need, page D-2
3.
Connecting to the Console Port, page D-3
4.
Starting the Terminal-Emulation Software, page D-4
5.
Connecting to a Power Source, page D-5
6.
Entering the Initial Configuration Information, page D-5
Accessing the CLI Through the Console Port
You can access the CLI on a configured or unconfigured switch by connecting the console port of the
switch to the serial port on your PC or workstation and accessing the switch through a Telnet session.
To access the switch through the console port, follow these steps:
•
“Taking Out What You Need” section on page D-2 .
•
“Connecting to the Console Port” section on page D-3
•
“Starting the Terminal-Emulation Software” section on page D-4
•
“Connecting to a Power Source” section on page D-5
•
“Entering the Initial Configuration Information” section on page D-5