Data Sheet
All contents are Copyright © 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Features
Benefits
Supported cable MIBs
●
DOCSIS-IF-MIB
●
DOCSIS-CABLE-DEVICE-MIB
●
DOCSIS-CABLE-DEVICE-TRAP-MIB
●
DOCSIS-QOS-MIB
●
IF-MIB
●
RFI-MIB
Cisco Configuration Express
Cisco Configuration Express allows direct shipment from Cisco to the end customer or
branch office, with factory-loaded configurations for high-volume deployments.
CiscoWorks***
CiscoWorks network management software provides common management across all
Cisco routers and switches.
Cisco ConfigMaker support
You can set up the Cisco 1805 network using the Cisco ConfigMaker application, a wizard-
based software tool that helps you easily configure and address Cisco routers, access
servers, hubs, switches, and networks.
LED status indicators
These indicators provide at-a-glance indications for power, network activity, and interface
status.
Reliability
WAN link redundancy
WAN link redundancy allows you to use the two onboard Fast Ethernet ports for alternate
WAN links.
Dial-on-demand routing (DDR)
DDR allows automatic backup of WAN connections using an external analog modem in
case of a primary link failure.
Hot Standby Router Protocol
(HSRP)
HSRP provides high network availability.
*Supported only on Cisco 1805 VPN Secure Broadband Cable Router.
** Supported in Cisco IOS Advanced IP Services Image
*** Supported post-FCS
Network-Management and Installation Tools
The Cisco 1805 supports a range of network-management and ease-of-installation tools.
With CiscoWorks, a Web-based network-management suite, you can remotely configure,
administer, monitor, and troubleshoot the Cisco 1805. With the increased visibility into network
behavior, you can quickly identify performance bottlenecks and track long-term performance
trends. CiscoWorks also provides sophisticated configuration tools to optimize bandwidth and
usage across expensive and critical WAN links in the network.
CiscoView, part of CiscoWorks, is a Web-based tool that graphically provides real-time status of
the Cisco 1805. It can navigate to display monitoring information on interfaces and provide
dynamic status, statistics, and comprehensive configuration information.
Product Specifications
Table 3 gives specifications of the Cisco 1805.
Table 3.
Cisco 1805 Specifications
Cisco 1800 Series
Cisco 1805
Chassis
Form factor
Desktop, 1-rack-unit (1RU) height (4.75 cm high with rubber feet)
Chassis
Metal
Wall-mountable
Yes
Rack-mountable
Yes (optional rack-mount kit: ACS-1841-RM-19=)
Dimensions (W x D)
●
13.5 x 10.8 in. (34.3 x 27.4 cm)
●
Height without rubber feet: 1.73 in. (4.39 cm)
●
Height with rubber feet: 1.87 in. (4.75 cm)
Weight
Maximum: 6.2 lb (2.8 kg)
