4
Figure 1
Connecting the Power Supply
Step 2
Connect the separate power cord to the power socket on the power supply.
Step 3
Connect the other end of the separate power cord to a power outlet.
Step 4
Turn on the router by pressing the power switch to the on ( | ) position.
Step 5
Confirm that the router has power by checking that the PWR LED on the front panel is on.
5
Connect the Router to Your Local Network
You need to provide straight-through Ethernet cables for connecting the router to the local Ethernet network. For more
information on these cables, refer to the “Cabling Specifications” chapter in the hardware installation guide that came with the
router. Follow these steps to connect the router to your local network:
Step 1
Connect one end of an Ethernet cable to the 10/100 ETHERNET port (the yellow port) as shown in Figure 2.
Caution
Always connect the Ethernet cable to the Ethernet ports on the router. Accidentally connecting the cable to the
wrong port can damage your router.
Cisco 1
720
SEE
MANUAL
BEF
ORE INST
ALLATION
DSU
56K
CD
AL
LP
RD
TD
CON
SOLE
AUX
FDX
LNK
100
WIC0O
K
WIC
1OK
Power socket
12237
Power supply
Separate
power cord
Attached
power supply cord
10/100 ETHERNET
+5, +12, -12
VDC
