Cisco 1700 series, Руководство пользователя

Страница: 91 / 108

178 179
Analog Voice Interface Cards
continued
Product Description
Supported Platforms
and Minimum Cisco
IOS Versions Comments
Cisco Interface Cards
VIC-4FXS/DID
Four-port FXS Voice/Fax
Interface Card
FXS port is used to
connect directly to phones,
fax machines, and key
systems . Generates
battery polarity reversal
and caller ID .
Modular Router Solutions
Voice and Fax Integration
3800 Series–12 .3(11)T
2800 Series–12 .3(8)T4 When used in a Cisco 2800
or 3800 router, requires a
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
ISDN BRI Voice Interface Cards
Product Description
Supported Platforms
and Minimum Cisco
IOS Versions Comments
VIC2-2BRI-NT/TE
Two-port BRI Voice/Fax
Interface Card
This two-port ISDN
terminal-side or network-
side Basic Rate Interface
(BRI) voice interface
card connects directly to
PSTNs and PBX/PABXs
and supports both on-
premise and off-premise
connections . Supports a
total of four voice channels
in a single interface card
via two RJ-45 physical
ports, and enables
toll-bypass and voice-over-
packet features .
Modular Router Solutions
Voice and Fax Integration
3800 Series–12 .3(11)T
2800 Series–12 .3(8)T4 When used in a Cisco 2800
or 3800 router, requires a
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
VIC2-2FXO
Two-port FXO Voice/Fax
Interface Card (universal
card for all countries) .
Also Supports CAMA
(Centralized Automated
Message Accounting) on
Any Port .
FXO ports are used to
connect to PBX or key
systems, or to provide
off-premise connections
to PSTN or PTT . Supports
battery reversal detection
and caller ID . These Cisco
VICs can be software-
configured to work in all
countries . Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only) .
Modular Router Solutions
Voice and Fax Integration
3800 Series–12 .3(11)T
2800 Series–12 .3(8)T4 When used in a Cisco 2800
or 3800 router, requires a
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
VIC2-4FXO
Four-port FXO Voice/Fax
Interface Card (universal
card for all countries) .
Also Supports CAMA
(Centralized Automated
Message Accounting) on
Any Port .
FXO ports are used to
connect to PBX or key
systems, or to provide
off-premise connections
to PSTN or PTT . Supports
battery reversal detection
and caller ID . These Cisco
VICs can be software-
configured to work in all
countries . Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only) .
Modular Router Solutions
Voice and Fax Integration
3800 Series–12 .3(11)T
2800 Series–12 .3(8)T4 When used in a Cisco 2800
or 3800 router, requires a
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
VIC2-2E/M
Two-port E&M Voice/
Fax Interface Card .
Also Supports CAMA
(Centralized Automated
Message Accounting)
on Any Port .
The two-port E&M voice
interface card for Cisco
voice/fax network modules
is used to connect to
PBX or key system trunk
lines . This voice interface
card works with existing
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H .323
standard for audio- and
videoconferencing .
Modular Router Solutions
Voice and Fax Integration
3800 Series–12 .3(11)T
2800 Series–12 .3(8)T4 When used in a Cisco 2800
or 3800 router, requires a
DSP module .
12 .3 Mainline and forward
supported in IP Voice
feature set .
Analog Voice Interface Cards
continued
Product Description
Supported Platforms
and Minimum Cisco
IOS Versions Comments
Cisco Interface Cards