2
Note: For
Items That You Provide
—You need only the items required to install your specific Cisco 1600 model.
Cables ordered from Cisco are colored as shown below.
Unpack the Box.
Note: The Cisco 1600 series routers are either of run-from-flash (RFF) or run-from-RAM (RFR) models. In
this document, model names without an R refer to both models. The “Router Memory” section in the hardware
installation guide that came with your router describes the differences between RFF and RFR models.
Cisco 1600 Router
Accessory Kit Items
Power supply
Power cord (black)
Softw
are
Configur
ation
Product documentation
Items That You Provide
10BaseT Ethernet cable
RJ-48S-to-RJ-48S (Cisco 1602)
(blue, if ordered from Cisco)
RJ-45-to-RJ-45
(red if ordered from Cisco for Cisco 1603)
(orange if ordered from Cisco for Cisco 1604)
Ethernet AUI cable
Hardw
are
Installation
Documentation
CD
Ethernet AUI transceiver or Ethernet 10BaseT hub
WAN interface card
(optional, might already be installed)
Phillips screwdriver
(if installing a WAN interface card)
Serial cable (Cisco 1601)
(blue if ordered from Cisco)
DB-25-to-DB-9 console
adapter (light gray)
Console cable
(light blue, RJ-45-to-DB-9)