Cisco 1538 series, Быстрый старт

Страница: 7 / 8

5
Display the Cisco 1538 Hub Manager
If you have the IP address to the hub, you can display the Cisco 1538 Hub Manager from your
intranet. You can use the Cisco 1538 Hub Manager to configure and monitor the hub.
1
Start Netscape Communicator (4.03 or higher) or Microsoft Internet Explorer
(4.01 or higher). Make sure that Java and JavaScript are enabled.
2
Enter the IP address of the hub in the URL field if you are using
Communicator
(the Address field if you are using Internet Explorer).
The Cisco 1538 Hub Manager page appears.
Note: The Cisco 1538 Series Micro Hub 10/100 Installation and Configuration Guide and the
Cisco 1538 Hub Manager online help provide complete information about the web console and
describe how to configure and monitor the hub.
Click Apply after
making changes
on a page.
Click Revert to
discard unapplied
changes on
a page.
15374
Click these topics to move from page
to page. On Netscape Communicator
only, when the cursor is above a topic,
a pop-up briefly describes the
options on that particular page.
Click a port to display its
settings, status, and statistics.
HOME PORT GROUP IP SNMP CDP SYSTEM
Click Help for
procedures and
detailed field
descriptions.
Shows when
another hub is
connected to
a stacking
connector on
the hub.