Management Options (Cisco 1538M Hub)
Cisco 1538 Series Micro Hub 10/100 Installation and Configuration Guide
1-8
Default Configuration Settings
The hub is designed to operate with little or no user intervention. After you assign the IP
information, the hub uses its default settings (Table 1-2) and begins forwarding packets as
soon as it is powered up and connected to compatible devices.
.
For procedures on how to reset all hub console port settings to the factory defaults, see the
“Resetting the Hub to the Factory Defaults” section on page 4-14.
Table 1-2
Default Settings and Cisco 1538 Hub Manager Pages
Feature
Default Setting
Hub Manager Page
Management
IP information
0.0.0.0
IP Management Page
Stack management
—
Group Management Page
Cisco Discovery Protocol (CDP)
Enabled
CDP Management Page
Performance Tuning
Speed of ports
Autonegotiate
Port Management Page
Security
Hub password
None
Home Page
Community string
public/private
SNMP Management Page
Trap manager
None
SNMP Management Page
Write manager
None
SNMP Management Page
Diagnostics
Usage reports
—
Detailed Group Statistics Page
Detailed Port Statistics Page
Remote monitoring
Enabled
—
Upgrades
Firmware
—
System Configuration Page
