3
Install the Router
2
A. Connect the router to the local network
Use the included yellow Ethernet cable for connecting the router to the local Ethernet network.
For more information on this cable, refer to the “Cabling Specifications” chapter in the
hardware installation guide that came with the router.
Step 1
Connect one end of the yellow Ethernet cable to the yellow ETHERNET port.
Step 2
Connect the other end to a port on the Ethernet hub or switch.
Cisco 1401
CONSOLE
ATM 25
ETHERNET
LNK
OK
FLASH PC CARD
12413
AUI
8
7
1
Ethernet port
Straight-through
Ethernet cable
Ethernet hub or switch
