Cisco 11.0 BT Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 58

background image

Configuring TN3270 Server on the Channel Interface Processor

15

TN3270 Configuration Task List

When you use the pu command, you enter PU configuration mode and can use all other commands
in this task list. Configuration values you enter in PU configuration mode will override other values
entered while in TN3270 configuration mode. In addition, you can enter PU configuration mode
from DLUR configuration mode when configuring PUs that are connected by means of DLUR.

If you are configuring PUs for directly connected hosts, you need not perform any additional
configuration tasks.

Configure DLUR

This task is required when configuring DLUR connected hosts. To configure DLUR parameters for
the TN3270 server, perform the following tasks beginning in TN3270 configuration mode.

Configure SAPs under DLUR

To configure SAPs under the DLUR function, perform the following tasks beginning in DLUR
configuration mode.

(Optional) Specify the idle time for server
disconnect. This command is also available in
TN3270 configuration mode.

idle-time num-of-seconds

(Optional) Specify the maximum time allowed
between keepalive marks before the server
disconnects. This command is also available in
TN3270 configuration mode.

keepalive num-of-seconds

(Optional) Specify whether the TN3270 session
will disconnect when an UNBIND command is
received. This command is also available in
TN3270 configuration mode.

unbind-action {keep | disconnect}

(Optional) Select whether “left-over” LUs can be
used from a generic LU pool. This command is also
available in TN3270 configuration mode.

generic-pool {permit | deny}

Task

Command

Create a DLUR function in the TN3270 server and
enter DLUR configuration mode.

dlur fq-cpname fq-dlusname

(Optional) Specify the fallback choice for the
DLUR DLUS.

dlus-backup dlusname2

(Optional) Specify the preferred network node
(NN) server.

preferred-nnserver NNserver

Task

Command

Create a SAP function under DLUR and enter
DLUR SAP configuration mode.

lsap type adapno [lsap]

(Optional) Identify an APPN virtual routing node
(VRN).

vrn vrn-name

Task

Command

«
...
13
14
15
16
17
...
»

Содержание 11.0 BT



























































Отзывы:

Нет отзывов

Похожие инструкции для 11.0 BT

E-20 - Dual Monaural Earphones

Бренд: Olympus Страницы: 2

Бренд: Lexmark Страницы: 3

Бренд: Partec Страницы: 98

OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION 10-2007

Бренд: Novell Страницы: 30

Бренд: Amazon Страницы: 60

Бренд: Honeywell Страницы: 2

Бренд: Honeywell Страницы: 14

7850LP-I1-5210E - Hand Held Products Dolphin 7850

Бренд: Honeywell Страницы: 36

Бренд: Honeywell Страницы: 46

RAPID EYE MULTI-MEDIA

Бренд: Honeywell Страницы: 144

Бренд: Honeywell Страницы: 160

Бренд: Honeywell Страницы: 176

Dolphin Power Tools

Бренд: Honeywell Страницы: 176

FreeAgent Desk 2TB

Бренд: Seagate Страницы: 2

Бренд: SonicWALL Страницы: 20

Бренд: Extreme Networks Страницы: 376

BD DISCRECORDER 2.7

Бренд: Ulead Страницы: 19

CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Бренд: Red Hat Страницы: 110

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды