below, from left to right.
Item
Function
LED Status
Meaning
1
Power
Solid orange
Power is applied
Rainbow colors
Unit is attempting to contact the
Cloud
Flashing white
Operation is in progress
Solid white
Fully operational
2
USB connectivity
Off
During boot or USB link
Solid orange
Initial link
Flashing orange
Internet connectivity not complete
Green
USB connection detected
3
HA status
Off
No HA available
Orange
Initial link
Flashing orange
High availability not complete
Green
HA available
MX450 Back Panel
Please note that the serial number is located on the product label at the back panel of the MX450-HW.
Reset button
Insert a paper clip if a reset is required.
A brief, momentary press: To delete a downloaded configuration and reboot.
Press and hold for more than 10 seconds: To force the unit into a full factory reset.
Mounting Hardware
The mounting hardware includes four sets of standard slot-head rack screws and nuts. The additional screws and nuts are different screw standards meant to
accommodate the most common rack mounts. When installing the appliance, make sure that there is sufficient space between the rear of the rack and other
obstacles to ensure adequate airflow. Ventilation is from side to side not from front to back. This MX security appliance requires a minimum of 10mm clearance
between the venting holes and any obstruction.
Safety Guidelines
2
