manualshive.com logo in svg

Cisco MERAKI MR44, Руководство по установке

Поделиться
Скачать
Cisco MERAKI MR44 Скачать руководство пользователя страница 9

Safety and Warnings

These operations are to be taken with respect to all local laws. Please take the following into consideration for safe operation:

•

Power off the unit before you begin. Read the installation instructions before connecting the system to the power source.

•

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.

•

Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could
result in a hazardous situation to people and damage to the system.

•

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than 15 A,
125 Vac, or 10A, 240 Vac.

•

Please only power the device with the provided power cables or standard PoE to ensure regulatory compliance.

9

Содержание MR44






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды