Power Source Options
The MR30H access point can be powered via PoE using either the Meraki PoE Injector (sold separately), or a PoE
switch.
Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the MR30H will reboot and be restored to
its original factory settings by deleting all configuration information stored on the unit.
The MR30H will function in low power mode when powered by a 802.3af power source. While in low power
mode, the MR30H will disable 802.3af out on the LAN1 port. Despite being in low power mode, the device can
still supply full wireless capabilities.
The factory reset button is located on the rear of the unit and must be ejected from the mount plate in order to
be activated.
4
