VCC-F32FV19CL
Rev.900-586-31-00
©2009 CIS Corporation. All rights reserved.
19
Remote controller address
Note: Do not write the data into the address other than specified, since it may cause
the damages or malfunction of the camera.
Remote controller data
Set the decimal number (000
～
255) for the remote controller data. Please be noted to set any
dummy data at read control mode.
CR
Be sure to input “CR” to confirm the end of the command.
(3)
Setting example
Set gain to +6dB with remote control function.
Step 1.
Set the camera to “000000” (assign the common camera number).
Write “1” into address “000” to set the camera into remote control mode.
Please be noted that the camera control switch becomes invalid in remote control mode.
Code from the PC: “000000W000001CR”
Step 2.
Set gain to +6dB.
Code from the PC: “000000W001002CR”
