VCC-SXCXP3NIR
Rev.905-0133-00
©2018 CIS Corporation. All rights reserved.
9
7.
Camera Operational Mode
7.1
Link Configuration
Transfer Control
CxpLinkConfiguration
CXP1_X1
CXP2_X2
CXP3_X3
7.2
Pixel Format
7.3
Camera Sync Mode
・
TriggerSelectorAndActivation
AquisitionMode
: Internal sync mode (Free run mode)
FrameStartRisingEdge
: External trigger sync mode (Fixed trigger shutter mode: rising edge)
FrameStartFallingEdge
: External trigger sync mode (Fixed trigger shutter mode: falling edge)
FrameStartLevelHigh
: External trigger sync mode (Pulse width trigger shutter mode: High active)
FrameStartLevelLow
: External trigger sync mode (Pulse width trigger shutter mode: Low active)
FrameBurstStart
: Internal sync mode (Burst mode of sequence function)
・
TriggerSource
This is to set how to input triggers of external trigger sync mode.
CXP_Host
:
This is to use Low Speed uplink of CoaXPress to input triggers via coaxial cable connected to a frame
grabber board.
LineIn :
This is to input triggers via No. 5 pin of the 6pin circular connector of the camera rear.
・
TriggerSoftware
When this command is executed, a trigger is generated in the camera and images for 1 frame are captured.
Please be noted that time accuracy with this trigger is not so precise as the trigger generated by
TriggerSource explained the above. Only TriggerSelectorAndActivation
--- FrameStartRisingEdge mode can be used
as Acquisition Control mode.
ImageFormatControl
PixelFormat
Mono8
Mono10
Acquisition Control
TriggerSelectorAndActivation
AquisitionMode
FrameStartRisingEdge
FrameStartFallingEdge
FrameStartLevelHigh
FrameStartLevelLow
FrameBurstStart
TriggerSource
LinkTrigger0
Line0
TriggerSoftware
(Execute)
