VCC-GC60L231CL
Rev.900-737-31-00
©2012 CIS Corporation. All rights reserved.
15
Remote controller address
Note: Do not write the data into the address other than specified, since it may cause the
damages or malfunction of the camera.
Remote controller data
Set the decimal number (000
～
255) for the remote controller data. Please be noted to set any
dummy data at read mode.
CR
Be sure to input “CR” to confirm the end of the command.
※
When changing the mode in series, at least 10ms shall be waited to send the next command after
receiving the response from the camera. And, after executing adjustment function, 2s shall be
waited to send the next command.
