VCC-GC21U11PCL
Rev.
900-763-30-00
©2013 CIS Corporation. All rights reserved.
10
5.
Function Settings
(
Camera functions can be set with serial communications.
)
Function Address
Data
Gain
001
0:
0 dB : Fixed Gain
1:
+ 3 dB : Fixed Gain
2:
+ 6 dB : Fixed Gain
3:
+ 12 dB : Fixed Gain
4:
Manual Gain: over 0
～
+12dB (Refer to Address 032 and 033.)
Shutter
002
2Tap Mode
4Tap Mode
8Tap Mode
0: 1/70s(OFF)
1/140s(OFF) 1/280s(OFF)
1: 1/140s
1/140s(OFF) 1/280s(OFF)
2: 1/280s
1/280s
1/280s(OFF)
3: 1/350s
1/350s
1/350s
4: 1/500s
1/500s
1/500s
5: 1/750s
1/750s
1/750s
6: 1/1000s
1/1000s
1/1000s
7: 1/2500s
1/2500s
1/2500s
8: 1/5000s
1/5000s
1/5000s
9: 1/7500s
1/7500s
1/7500s
10: 1/10000s
1/10000s
1/10000s
11: 1/15000s
1/15000s
1/15000s
12: 1/20000s
1/20000s
1/20000s
13: 1/30000s
1/30000s
1/30000s
14: 1/30000s
1/40000s
1/40000s
15: 1/30000s
1/40000s
1/50000s
16:
Manual Shutter (Refer to Address 036 and 037.)
Trigger Shutter Mode
004
0:
Normal Shutter Mode (Trigger OFF)
1:
Fixed Trigger Shutter Mode (Shutter speed can be set with address 002.)
2:
Pulse Width Trigger Shutter Mode
(Shutter speed can be set with trigger pulse width.)
Trigger Polarity
011
0:
Positive
1: Negative
Output Data Selection
013
0:
8bit Output
1:
10bit output (10bit cannot be output at 8Tap Full Configuration mode.)
Partial Scan Mode
015
0:
Full Frame Scan Mode
1: Partial
Scan
Mode
Output image flip vertical
021
0:
Normal
1: Flip
Vertical
Gain CC Control ON/OFF
023
0:
OFF
1:
ON (Gain and WB can be controlled via CC2, CC3, and CC4.)
