Function Address
Data
Remarks
Trigger Polarity
Neg/Pos
011
0: Trigger Positive Input
1: Trigger Negative Input
F, G
Initial setting (0)
Input Trigger
Port Select
012
0: Camera Link
1: 12pin Circular connector
F, G
Initial setting (0)
8 bit / 10 bit
013
0: 8bit Output Data
1: 10bit Output Data
※
Valid when address 018 data is 0 (RAW).
F (RAW), G
Initial setting (0)
Gamma 014
0:
γ
=1.0 (OFF),
1:
γ
=0.45 (ON) (option)
F, G
Initial setting (0)
No Function
015
Not used.
Aperture 016
0:
Aperture
OFF,
1-3: Aperture ON
G
Initial setting (0)
No Function
017
Not used.
No Function
018
Not used.
No Function
019
Not used.
HD In/Out
020
0: HD, VD output
1: HD, VD input
F, G
Initial setting (0)
8 bit Format
021
0: 9-2 bit (Upper)
1: 8-1 bit (Middle)
2: 7-0 bit (Low)
F (RAW), G
Initial setting (0)
Cursor ON/OFF
022
0: OFF
1: ON
F (RAW), G
Initial setting (0)
Cursor H
address
023 & 024 Cursor H address (023: H Byte 024: L Byte)
F (RAW), G
Cursor V
address
025 & 026 Cursor V address (025: H Byte 026: L Byte)
F (RAW), G
No Function
027 – 047 Not used.
Partial Scan
Effective lines
048 & 049 Partial Scan effective line number (048: V Byte, 049: L Byte)
255 linse + 3 * setting value (0
〜
max 142)
: min 255 lines
〜
max 681 lines
Initial value: 0, 1 (258 lines)
F, G
(3 line/step)
Partial Scan
Start Position
050 & 051 Partial Scan Start Position (050: V Byte, 051: L Byte)
: min 0
〜
258 (address 048&049 data)
Initial value: 0, 133
F, G
(3 line/step)
F
・・・
F32 Color camera series only.
G
・・・
G32 B/W camera series only.
900-525-31-00
10
