VCC-V90S Rev.900-625-30-00
©2008 CIS Corporation. All rights reserved.
3
1.
Scope of Application
This is to describe VCC-V90S,
a high resolution 1/3” 1.3Mpixel CCD image sensor intelligent camera. All specifications
contained herein are subject to change without prior notice. Reproduction in whole or in part is prohibited.
2.
Handling Precautions
The camera must not be used for any nuclear equipments or aerospace equipments with which mechanical failure or
malfunction could result in serious bodily injury or loss of human life.
Our warranty does not apply to damages or defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below. Our warranty does not apply to damages or malfunctions caused by
neglecting these precautions.
・
Do not use or store the camera in the following extreme conditions:
Extremely dusty or humid places.
Extremely hot or cold places (operating temperature –5 to +45 )°C
Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
Places subject to fluorescent light reflections.
Places subject to unstable (flickering, etc.) lighting conditions.
Places subject to strong vibration.
・
Do not
apply excessive force or static electricity that could damage the camera.
・
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc.) and when camera is not
in use, put the lens cap on.
・
Connect the camera properly. Improper connection may cause damages not only to the camera but also to
the connected devices.
・
Confirm the mutual ground potential carefully and then connect the camera to monitorsorcomputers. AC
leaks from the connected devices may cause damages or destroy the camera.
・
Do not apply excessive voltage.(Use only the specified voltage.) Unstable or improper power supply voltage may cause
damages or malfunction of the camera.
・
Electric current of the auto Iris Lens must be less than 50mA.
・
Protruding portion of the lens from the lens mount surface must be less than 4.8mm.
If C mount lens is installed while CS adjust is set, it might result in breaking lens or the camera.
・
Electronic Iris and Lens iris may cause “hunting” effect, depending on the image subject.
・
Electronic iris mode can have a color change when used with fluorescent lights.
