DCC-HD3N Rev. 905-0185-00
©2018 CIS Corporation. All rights reserved.
4
(15)
Shutter Speed Variable
Range
MANUAL: 1/13600s ~ 1/25s
*Shutter speed slower than 1/60s will be limited by the frame rate corresponding to the video
output format.
AUTO: 1/13600s ~ 1/25s (Upper limit and lower limit can be set.)
*Same as MANUAL, shutter speed slower than 1/60s will be limited by the frame rate
corresponding to the video output format.
(16)
White Balance Adjustment
Range
AUTO, AUTO (Outdoor), ATW, 7 different Preset, MANUAL, User Preset 1~5, and One Push
Preset:
Daylight(5500K),Cloudy(6500K),Shade(8000K),Tungsten(3200K),Fluorescent(White),
Fluorescent(Neutral White), Fluorescent(Daylight)
(17)
AE Photometric System
Average/Center-Weighted/Spot/Backlight Compensation
(18)
Flicker Cancel
ON, OFF (typ.)
*Valid when 60fps, 59.94fps, 30fps, 29.97fps
(19)
Edge Enhancement
OFF,1~7 (typ.2)
(20)
Color Correction
Standard, Fluorescent Light, Tungsten Lamp
(21)
Color Saturation
Adjustment
0%(B/W)~100%(typ.)~200%
(22)
Color Compression
OFF, 1~7(typ.5)
(23)
Noise Reduction
ON,OFF
(24)
Gamma (Contrast)
BT.709 -2, BT.709 -1, BT.709, BT.709 +1, BT.709 +2
(25)
Master Pedestal
-100 ~ 0 ~ +100
(26)
Pedestal (R, G, B)
RGB: -100 ~ 0(typ.) ~ +100 each
(27)
Color Balance
RGB: 50 ~ 100(typ.) ~ 150 each
(28)
Pixel Defect (White spot)
Correction
Corrected at factory setting.
(29)
LTC
OFF, ON. The external SMPTE Time code can be input to LTC IN terminal (internal self-running
time code is resettable).
(30)
Preset (Camera settings)
1, 2, 3, and 4 (4 presets can be set.)
(31)
DC IRIS output
Auto/Open Selectable. Can be used with electric shutter (With priority to electric shutter).
(32)
Remote Control Operation The camera can be controlled via RS-232C communications with
φ
3.5 plug (4poles). Camera
settings can be controlled by control software via PC. With connecting to the optional remote
controller, camera settings can be set on OSD (On Screen Display).
(33)
Safety/Quality standards
UL: Conform to UL Standard including materials and others.
RoHS: 2011/65/EU
EN50581(RoHS 2)
CE and FCC are acquired as VCC-HD3N (chassis typed camera).
(34)
Durability (*1)
Vibration Acceleration : 98m/s
2
(10G)
Frequency : 20~200 Hz
Direction
: X, Y, and Z 3 directions
Testing time : 120min for each directions
Shock
No malfunction shall be occurred with 980m/s
2
(100G) for ±X,±Y, and ±Z,
6 directions.
(35)
Operation Environment
(*1)
Operation
Guaranteed
-5 ~ +45
℃
Humidity 20 ~ 80%RH with no condensation
(36)
Storage Environment (*1) Storage Temperature: -25 ~ +60 , Humidity: 20
℃
~ 80%RH with no condensation.
(*1) Applied when embedded in VCC-HD3N, chassis typed camera.
<3G-SDI output Level A and Level B>
A difference between Level A and Level B is a way of mapping Y signal and Cb/Cr signal onto 3G-SDI standard signal. The
difference does not affect the resolution of the video signal. Some 3G-SDI receivers correspond to either Level A or B,
whereas other receivers correspond to both Levels, so please set the camera mode to match your 3G-SDI receiver.
