DCC-HD1 Rev.900-785-30-00
©2013 CIS Corporation. All rights reserved.
5
(26)
Black Level Adjustment
Level:0
～
127(typ.0)
(27)
Pixel Defect (White spot)
Correction
Corrected at factory setting.
(28)
Remote Control Operation Cameras can be controlled via RS-232C communications or USB 2.0 Full Speed (12Mbps).
Camera settings can be controlled by control software via PC.
(29)
Safety/Quality standards
UL: Conform to UL Standard including materials and others.
RoHS: Conform to RoHS
CE and FCC are acquired as VCC-HD1 (chassis typed camera).
(30)
Durability (*1)
Vibration Acceleration
:
98m/s
2
(10G)
Frequency : 20
～
200 Hz
Direction
: X,Y, and Z, 3 directions
Testing time
: 120min for each direction
Shock
No malfunction shall be occurred with 980m/s
2
(100G) for
±
X,
±
Y, and
±
Z,
6 directions.
(31)
Operation environment
(*1)
Performance
guaranteed
0
～
+40
℃
Humidity
20
～
80%RH
with no condensation
Operation
guaranteed
-5
～
+45
℃
Humidity
20
～
80%RH
with no condensation
※
Performance guaranteed: All the specifications specified in this manual is guaranteed under
performance guaranteed temperature.
※
Operation guaranteed : All the camera functions operate normally under operation guaranteed
temperature.
(32)
Storage Environment (*1) Storage Temperature: -25
～
+60
℃
, Humidity: 20
～
80%RH with no condensation.
(*1) Applied when embedded in VCC-HD1, chassis typed camera.
<3G-SDI output Level A and Level B>
A difference between Level A and Level B is a way of mapping Y signal and Cb/Cr signal onto 3G-SDI standard signal. The
difference does not affect the resolution of the video signal. Some 3G-SDI receivers correspond to either Level A or B,
whereas other receivers correspond to both Levels, so please set the camera mode to match your 3G-SDI receiver.
