CIS CIS-NW-POE, Руководство пользователя

Страница: 17 / 27

17
Enabled Check this box to activate the rule.
Chain Set to dstnat
Dst. Address The Dst. Address is your public IP address. It will be automatically updated.
Protocol Select TCP or UDP based on which port you need to open.
Dst. Port Enter the port(s) to open. You can enter a range (e.g., 5000-6000) or separate
multiple ports with commas (e.g., 80, 443, 3389).
Action Set to dst-nat .
To Addresses Enter the IP address of the device on your network.
To ports Optional. If you wish for the traffic to be forwarded to a different port on the device,
enter it here.
Comment The comment must be set to Port-Forward or the rule will not work!
The comment must end with “Port - Forward” for the rule to work!