CIS—WAP/ACWAP
Connecting your Access Points
Connect an Ethernet cable from your router or switch to your access point. There is a section of the case
that can be punched
-
out, allowing the cable to run from the back of the access point into the case.
Mounting
CIS access points can be securely mounted to a wall, ceiling, or pole with the included mounting straps.
1.
Use the template (included in the box) to mark the location of the screw holes.
2.
If mounting to a wall, plug the holes with the included plastic anchors. If mounting to a ceiling, you may place the in-
cluded steel plate on the other side of the surface for reinforcement.
3.
Use the included screws to attach the mounting plate to the plugs (wall mount) or steel bracket (ceiling mount).
4.
Pull the Ethernet cable through the breakaway tab into the CIS access point
’
s enclosure.
5.
Attach the CIS access point to the mounting bracket.
6.
Close the cover and lock the enclosure.
Configuration
Determine the IP address of the access point assigned by your router or DHCP server. Log into your router
and locate your access point in the DHCP leases.
