MK:429 Lightweight Outdoor Microphone
Page 6
Step 2
Step 1
Step 3
Assembling the MK:429
Step 1
A.
Remove the microphone capsule from the preamplifier and connect
the ZL:2xx cable to the MV:200 Preamplifier
B.
Push the MV:200 Preamplifier through the
Preamplifier Housing
.
Reattach the microphone capsule to the preamplifier.
C.
Ensure that the O-Ring is located in the top of the Preamplifier
Housing and that the MV:200 Preamplifier and ZL:2xx
Microphone Cable is secure.
Step 2.
A.
Screw the
Top Cone
to the
Preamplifier Housing
to
secure the MV:200 Preamplifier.
It is important that the
Top Cone
is secure on the
Preamplifier Housing
.
Step 3.
A.
Attach the
Birdspikes
to the
Base & Birdspike
Holder
.
Do not
attach the Windshield.
Ensure that the three birdspikes are correctly located in the holes
in the
Base
unit.
B.
Push the
Preamplifier Housing
into the
Base & Birdspike
Holder
and secure using the two screws supplied.
Ensure that the ZL:2xx microphone cable exits through the hole in
the side of the
Base
units
C.
Insert the
Windshield
into the
Birdspikes
.
D.
Attach the
Tripod Mount
to the
Base
unit.
