Configure the Software — Network Connection
Select the
Tools | Preferences
menu option and click on the
Communications
tab.
Select the
TCP/IP
option then click the
Serial Server
button to configure
the settings for the
SE5001 Serial Server
settings.
The
Monitor
software should detect the
Serial Server
on your network.
Click on the IP address
(1)
and then on the
Config
button
(2)
.
Select an
IP Address
,
Gateway
and
Subnet Mask
to suit your network. If
unsure, contact your network supervisor. If these are not correct for your
particular network then the LiveNoise software will not connect to the
sound level meter.
Press the
Config Now
button to set the new configuration then close the
Monitor
program.
Back in the LiveNoise program, enter the
same IP address. In this example the
Serial
Server
is configured to 192.168.2.10.
The port number should usually be left at
4660.
