CK:199 Trojan
2
Noise Nuisance Recorder User Manual Guide
Page 12
If the instrument has been left unattended for more than 15 minutes with the case
closed, the display will be switched off to reduce power consumption. This can be
changed in the NoiseTools software.
Press any key on the instrument to activate the display and then press the Stop button.
The instrument will show the overall LA
EQ,t
and L
AFmax
values for the measurement.
Press the Exit key to return to the main screen.
Packing away the instrument
Before packing the instrument away, switch off the instrument. Press and hold the
power button on the side of the sound level meter until the instrument has switched off.
Disconnect the mains power supply from the socket.
The microphone and preamplifier can be stored in the case along with the wireless
remote control units. This will protect the microphone from damage during transit and
storage.
To remove the preamplifier from the cable, carefully loosen the larger locking ring until
the cable can be removed.
Do not attempt to twist or turn the cable whilst it is connected to the preamplifier. This
may damage the cable and prevent the instrument from working correctly.
Do not remove the microphone capsule from the preamplifier.
The microphone cable and mains power supply can be disconnected from the case if
required. This is not essential and the cables can be stored in the backpack when
connected to the main case.
Store the accessories such as the tripod in the backpack.
