Cirris 4200 Series Скачать руководство пользователя страница 43

Страница: 43 / 60

Network Settings

22.

Network Settings

In order to print, the 4200 Series must be connected to a network running Cirris Hub Software. To set this up, from the

Main Menu, select System Settings, and then Network Settings. The options on this screen will allow your tester to com-

municate with a network running Cirris Hub Software.

Note:

An IT professional will likely need to help you in setting up your tester network settings.

■

Choosing between Ethernet or Wi-Fi

Ethernet is the most reliable method for connecting your tester to the Hub network. Once you have entered the settings for

Ethernet and Wi-Fi, you may switch between one or the other by simply by changing the Mode in Network Settings.

22.1

Ethernet

Cirris suggests using Ethernet whenever possible to ensure a reliabel

connection.

Using an Ethernet cable, connect your tester to the same network

router or switch that is connected to the PC running Cirris Hub

Software.

On the Network Settings screen:

●

Mode: Ethernet.

●

Server: IP address for the computer running Cirris Hub Soft-

ware.

○

The tester will automatically detect the IP address of the

computer running Cirris Hub Software If the tester is on the same subnet.

○

Enter the IP address or host name of the computer running Cirris Hub Software if the network service is not de-

tected.

Note:

Generally, you will want to have a static IP address assigned to the computer running Cirris Hub Software.

●

Port: You do not have to enter a port if the tester automatically detects the Cirris Hub Server on its subnet. The de-

fault port is 12568 or enter the port number as set up by the IT administrator.

Press Done. The tester should say Connecting to the Hub then return to the System Settings screen. When you load a

test from the Main Menu, you will notice that you can select F: drive.

Your tester should now appear on the list of available testers in Cirris Hub Software. See the Cirris Hub Software Installation

Guide for more information.

Network Settings

Cancel

Done

None

Refresh

Ethernet

Mode:

SSID:

Enter Username

Pre-Shared Key

Auth Mode:

Username:

Enter Password

Password:

Enter Server Port

Enter Server IP

Server:

Port:

Add CA Cert

Содержание 4200 Series





























































Результаты поиска

Содержание 4200 Series

Отзывы:

Cirris 4200 Series, Руководство пользователя, Страница: 43 / 60

Результаты поиска

Содержание 4200 Series

Отзывы: