Circutor Wibeee Max, Инструкция по эксплуатации

Страница: 18 / 48

18
Wibeee Max
Instruction Manual
Table 11: Description of the LEDs�
LED Description
Red Blinking light:
Powered device.
Blue
Indicates the connection status:
Slow blinking light (1s): Generating a Wi-Fi network.
Fast blinking light (<1s) : Connected to a Wi-Fi network.
Steady light: Data being sent over the network.
4.4.- KEY
The device has a RESET key,
Figure 7
.
Reset
key
Figure 7:Wibeee Max Key�
The RESET key has 2 functions:

During the start-up of the device, it is used to select the scale of the current measuring
sensor, see
“3.2.- INSTALLATION”
.

Restore the device's factory settings. To do this, hold down the RESET button for 10
seconds, until the device's red and blue LEDs simultaneously flash three times.
4.5.-START-UP
During the start-up of the device, the Wibeee Max goes through different states:
1�- Configuration
state
Blue LED → Slow blinking light (1s)
Red LED → Slow blinking light (1s)
In this state, the
Wibeee Max
generates its own Wi-Fi network called
WIBEEE_xx:xx:xx�
It is only used to configure the device and connect it to the user's network.
If you want to return to this state to obtain the initial conditions, you should hold down the Re-
set button for more than 6 seconds. The device deletes any previous settings and restores the
default values.