Circutor RGU-10 MT, Инструкция по эксплуатации

Страница: 27 / 42

27
Instruction Manual
RGU-10 MT
The device does not save changes to the settings until they are validated using the
PROG
key.
When the keyboard is inactive for a certain period, the device exits the programming menu. “
EXIT
” is
shown on the display and the changes are not saved.
6�1�- COMMUNICATIONS SETTINGS
Note: The communications menu is only shown in the RGU-10C MT model.
When you go into the communications menu, the menu’s home screen is displayed,
Figure 25
.
Figure 25:Home screen of the communications menu�
Press the PROG key to access the configuration parameters.
6�1�1�- PERIPHERAL NUMBER
To edit the peripheral number, press the td key repeatedly to increase the value of the digit.
When the desired value is shown on the screen, validate the number by pressing the
PROG
key.
Minimum programming value: 1
Maximum programming value: 99
6�1�2�- TRANSMISSION BAUDRATE
To change the transmission speed, press the
td
key repeatedly. The transmission baudrate is displayed
in units of thousands.