Circutor REC 4, Инструкция по эксплуатации

Страница: 13 / 24

PENDIENTE DE V
ALIDACIÓN
4.4.- OPERATING MODES
The device has two operating modes, manual and automatic , which can be selected using the
mode selector switch (
Figure 4
and
Figure 5
).
4�4�1�- MANUAL
The REC4 can operate in manual mode as if it were a standard RCCB.
To operate in this mode, the mode selector switch must be all the way to the top, in OFF posi-
tion, to disable the unit’s automatic reclosing device. (
Figure 8
)
The RCCB must be reclosed manually.
The
AUTO
and
REC
LEDs are off.
Figure 8: REC4 in manual mode, with mode selector switch at OFF�
4�4�2�- AUTOMATIC
To operate in Automatic mode the mode selector switch must be completely downward,in ON
position, to enable the device’s automatic reclosing system.(
Figure 9
)
The AUTO LED is constantly lit and the REC LED lights up based on the unit’s status.
Figure 9: REC4 in automatic mode, with mode selector switch at ON�
13
Instruction Manual
REC4