Circutor PVS-10, Руководство по установке

Страница: 8 / 52

2.- FORESEEABLE MISUSE
This type of canopy is not intended to:

To withstand overloads higher than those indicated in the corresponding certificate of technical
characteristics, due to meteorological conditions (snow and wind) of the site and the own weight of
the solar panels.

People will not be allowed to climb onto the canopy, with the exception of those who access it to
carry out maintenance and assembly tasks. No more than one person with their personal work material
(100 kg) may climb onto the canopy.

It is not allowed to cover the sides, front or rear with any type of enclosure that wholly or partially
prevents the passage of the wind.

The installation of posters or jutting elements is not allowed, nor in general, any added element that
increases the surface exposed to the wind.

Only the assembly of original parts and components supplied by CIRCUTOR is allowed.

CIRCUTOR will not be held liable for any unauthorised modification to the canopy, once the same
has been put into service.

If a wall is installed along the entire length of the canopy, a special study will be required to vary the
coefficient of obstruction contemplated in the calculation.
Figure 1: Variation of the obstruction coefficient�

If the canopy is installed in the vicinity of a height change or on a steep wall or mound that increases
the height of the canopy above the ground level to more than 3 m in height at the centre point of
the roofing, a special study will be required owing to the modification of the pressure and suction
coefficients considered in the calculation.
8
PVS2, PVS2-R
Installation Guide