Circutor Mi5500e, Руководство пользователя

Страница: 21 / 37

22

Safety warnings

Before to use this instrument the User guide and Safety warnings must be read
and understood.
 Safety procedures and rules for working near high voltage energized systems
must be observed during the use of this equipment. The generated voltages may
be dangerous.
 Do not connect or disconnect the test leads during the measurement.
 Do not touch the acrylic cover of the galvanometer with the energized terminals.
This could cause a static charge that will affect all the measurements.
 Be careful not to make short-circuit between the high voltage terminals and the
“-R” or “Guard” terminals while a measurement is running, because it could be
dangerous for the operator.
 Be sure that there are not any voltage difference between the points to which the
insulation tester will be connected to, neither between them and ground.
 The panel, terminals and connectors of the equipment must stay dry and clean.
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.
Used symbols

Caution, risk of electric shock.

Caution, refer to User Guide.

Equipment complies with current EU Directives.