Circutor EMK Series Скачать руководство пользователя страница 18

Страница: 18 / 20

EMK

series

Instructions Manual M98118701-03-19A 18

GUARANTEE,

CIRCUTOR guarantees its products against any manufacturing defect for two years after

equipment delivery.

CIRCUTOR will repair or replace any defective factory product returned during the guarantee

period.

No returns will be accepted and no unit will be repaired or replaced if it is not

accompanied by a report indicating the defect detected or the reason for the return.

The guarantee will be void if the equipment has been improperly used or the storage, installation

and maintenance instructions listed in this manual have not been followed. "Improper usage" is

defined as any operating or storage condition contrary to LV Regulations or that surpasses the

limits indicated in the technical and environmental features of this manual.

In particular, capacitor units are very sensitive to adverse environmental conditions, to

temperatures above the established limits and overloads produced by the absorption of harmonic

currents. Therefore, special care must be taken to not surpass these usage conditions.

CIRCUTOR accepts no liability for possible damage to equipment or other parts of the installation,

therefore it will not cover any possible penalties resulting from possible failure, improper

installation or "improper usage" of the equipment.

Consequently, this guarantee does not apply to failures occurring in the following cases:

1. Overvoltages and/or electrical disturbances in the supply

2. Water, if the product does not have the appropriate IP classification

3. Poor ventilation and/or excessive temperatures

4. Improper installation and/or lack of maintenance

5. Buyer repairs or modifications without the manufacturer's authorisation

Technical assistance

CIRCUTOR can provide advice and technical assistance for the planning and installation of

capacitors, automatic power factor correction equipment and harmonics filters.

CIRCUTOR, SA

Vial Sant Jordi, s/n

08232 Viladecavalls (Barcelona)

Technical Assistance Service: 902 449 459 (Spain)

Tel. +34 93 745 29 00 (International)

E-mail: [email protected]

Fax: +34 93 745 29 14

Web: www.circutor.es

E-mail:

[email protected]

Содержание EMK Series





















Результаты поиска

Содержание EMK Series

Отзывы:

Circutor EMK Series, Инструкция по эксплуатации, Страница: 18 / 20

Результаты поиска

Содержание EMK Series

Отзывы: