Circutor DHC-96 Adc, Инструкция по эксплуатации

Страница: 18 / 50

5�1�- CONFIGURATION OF THE INPUT
Figure 10
, shows the main screen of the input configuration menu, from which the display value and
measurement range are configured.
inPt
Figure 10: Input configuration menu, main screen�
Press the key to open the configuration menu.
inPt
in i
Unt. i
in 2
1.000
oFF
5.000
Figure 11:Input configuration menu�
5�1�1�- DISPLAY VALUE
In this screen, the value to be displayed is configured when the maximum value of the measurement
range enters the device.
in i
1.000
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.
When you reach the last digit and press the key, you select the position of the decimal point.
Use the to modify the decimal point.
18
DHC-96 mAdc, DHC-96 Adc
Instruction Manual