oFF
, relay output 1 is disabled.
rEn
, remote control output.
ALr
, alarm output.
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�4�2�- RELAY PULSE DURATION
The alarm relay can behave in 2 different ways:
1�-
The relay is activated when the alarm is triggered and is deactivated when the alarm
is deactivated.
2�-
The relay is activated when the alarm is triggered and is deactivated after a pro-
grammed period of time, even though the alarm condition has not been cancelled.
This screen is used to configure the programmed time, i.e., the relay pulse duration.
To make the relay operate in mode
no� 1
, program the value to
0
.
tinE
0000
ñ-
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Minimum configuration value:
0 x 0.1 s
Maximum configuration value:
9999 x 0.1 s
Example:
Use program 0050 to configure a value of 5 s.
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�4�3�- ALARM PARAMETER
This screen is used to configure the parameter that will be used to activate the alarm.
itEn
i--H
ñ-
Use the
key to browse the different options:
F--H
, Active alarm when the frequency is higher than the alarm value.
-
26
DHC-96 Aac
Instruction Manual
Содержание DHC-96 Aac
