Circutor DCP-96 Vac, Инструкция по эксплуатации

Страница: 18 / 32

18
DCP-96 Vac
Instruction Manual
Note:
The password can be modified, see
“6.2.4.- ACCESS PASSWORD”
�
With a long keystroke (>3s), press to validate the data.
If the password entered is incorrect, the
Err
message will appear for a few seconds and the device
will return to the password configuration screen,
Figure 9
.
6�1�- CONFIGURATION OF THE INPUT
Figure 10
, shows the input configuration menu from which the measurement system and the primary
and secondary voltage are configured.
Measurement system
Primary voltage
Secondary voltage
Save configuration
inpt
nEt
n34
.
inpt
pt 1
0380
.
.
V
k
inpt
pt 2
0500
.
.
V
SAuE
>3s
>3s
>3s
>3s
inpt
nEt
n34
.
inpt
pt 1
0380
.
.
V
inpt
pt 2
0500
.
.
V
SAuE
no
Figure 10: Input configuration menu�
6�1�1�- MEASUREMENT SYSTEM
In this screen we can configure the measurement system used in the installation.
inpt
nEt
n34
.
>3s
inpt
nEt
n34
.
With a long keystroke (>3s), press to access the value’s configuration.
Use the keys and to browse through the different options:
n34
, three-phase network measuring with 4-wire connection.
n.33
, three-phase network measuring with 3-wire connection.
n.12
, single-phase measuring.
With a long keystroke, press to validate the option.
Use the keys and to browse through the menu screens.