Circutor DCP-96 Vac, Инструкция по эксплуатации

Страница: 17 / 32

17
Instruction Manual
DCP-96 Vac
6.- CONFIGURATION
Press and hold the key for more than 3 seconds to enter the device’s configuration menu. The
device’s configuration is organised in different menus,
Figure 8
.
>3s
Configuration of
the input
Software version
System
configuration
2206
L1
2207
2208
V
L2
L3
.
.
.
ProG CodE
0000
inpt
nEt
n34
.
SyS
CyC
no
dCPU
1002
1906
-
>3s
>3s
>3s
Figure 8: DCP-96 Vac configuration menu�
From any screen of the configuration menus, if no key is pressed for 1 minute, the device leaves the
configuration menu and returns to the display screen.
Note:
In
“ANNEX A.- CONFIGURATION MENU”
you can see the complete configuration menu.
Before accessing the configuration menu, it is necessary to enter the access password.
>3s
2206
L1
2207
2208
V
L2
L3
.
.
.
ProG CodE
0000
>3s
>3s
CodE
0001
inpt
nEt
n34
Figure 9: Access to the configuration menu in the programming mode�
Use the key to modify the value of the flashing digit.
When the desired value is shown on the screen, press the and keys to skip the digit.
Default password:
0001