Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
The key
jumps between the possible options.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
Configuration values
Table 31:Configuration values: Selecting the screens that will be displayed�
Selecting the screens that will be displayed
Possible values
Yes
, the display screens are those that were stored in previous programming
settings of the device. (In the case of new devices, these will be the same as those
of the
analyzer
profile)
No
, the display screens are selected.
Press key
to access the next programming step.
6�14�2�- SELECTING THE SCREENS
Note:
The following screen is displayed if you have selected the
USEr
profile. And
No
has been selected
in,
6.14.1.- SELECTING THE SCREENS THAT WILL BE DISPLAYED
This screen displays the first screen of the
analyzer
profile,
Phase-phase Voltage
and the
user
profile
viewing option can be selected.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
The key
jumps between the possible options.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
48
CVM-C11
Instruction Manual
Содержание CVM-C11
