Circutor CVM-C11, Инструкция по эксплуатации

Страница: 33 / 106

5�1�3�- DETECTION OF INCORRECT DIRECTION OF ROTATION
The device has a system for detecting the incorrect direction of rotation of the voltages. In other words,
if each of the voltages has been correctly connected to the appropriate terminal, L1 to terminal
U
L1
, L2
to terminal U
L2
and L3 to terminal U
L3
.
If there is an error in the direction of rotation, the icons
L1
,
L2
and
L3
flash on the display.
The device has a RS-485 communications parameter, which indicates whether an incorrect direction of
rotation has been detected (“
7.3.7.
DETECTION OF INCORRECT DIRECTION OF ROTATION
.
”)
Note:
The detection of the direction of rotation is only enabled for measurement systems: Three-phase
network measurement (
4-3Ph
,
3-3Ph
y
3-ArOn
) and two-phase network measurement with 3-wire
connection (
3-2Ph
).
5�2�- e
3
PROFILE
This profile is identified with the symbol at the top of the screen.
The installation's consumed and generated energy are displayed on the
e
3
profile of the device.
The installation status is also displayed:
Installation is consuming energy.
Installation is generating energy.
A long keystroke, ≥ 3 sec, of key will display the generation values. The generation values are
identified with the negative sign on the screen, which appears in front of each parameter.
A long keystroke, ≥ 3 sec, of key
will display the consumption values.
Use keys and to browse the different screens.
Active Energy Tariff 1
Active Energy Tariff 2
Active Energy Tariff 3
Total Active Energy, ∑
Consumption and generation values only available for the 4 quad-
rant option.
Apparent Energy Tariff 1
Apparent Energy Tariff 2
Apparent Energy Tariff 3
Total Apparent Energy, ∑
Consumption and generation values only available for the 4 quad-
rant option.
33
Instruction Manual
CVM-C11